摘要：配置和编译：此处为最简易的版本，disable掉了所有的扩展模块
配置和编译：此处为最简易的版本，disable掉了所有的扩展模块; [plain]
./configure --prefix=/home/pub/johnny/network/install-php --host=mips-linux-gnu --datadir=/home/pub/johnny/network/install-php/data --disable-FEATURE --disable-all "CC=mips-linux-gnu-gcc -EL" "CFLAGS=-EL" "LDFLAGS=-EL"
make
make istall
./configure --prefix=/home/pub/johnny/network/install-php --host=mips-linux-gnu --datadir=/home/pub/johnny/network/install-php/data --disable-FEATURE --disable-all "CC=mips-linux-gnu-gcc -EL" "CFLAGS=-EL" "LDFLAGS=-EL"
make
make istall
4、测试：
1)、修改fastcgi.conf
添加：
[plain]
fastcgi.server += (
"/test.php" =>
((
"socket" => "/tmp/lighttpd.test.event.socket",
"bin-path" => "/tmp/network/sbin/php-cgi",
# "bin-path" => "/home/pub/johnny/network/install-php/bin/php-cgi",
# "bin-path" => "/tmp/NMP/bin/test.php",
"max-procs" => 1,
# "host" => "127.0.0.1",
# "port" => 8081,
"check-local" => "disable",
))
)
fastcgi.server += (
"/test.php" =>
((
"socket" => "/tmp/lighttpd.test.event.socket",
"bin-path" => "/tmp/network/sbin/php-cgi",
# "bin-path" => "/home/pub/johnny/network/install-php/bin/php-cgi",
# "bin-path" => "/tmp/NMP/bin/test.php",
"max-procs" => 1,
# "host" => "127.0.0.1",
# "port" => 8081,
"check-local" => "disable",
))
)
2)、把/home/pub/johnny/network/install-php/bin/php-cgi copy 到开发板/tmp/network/sbin/php-cgi
3)、在/tmp/network/webpages/下创建test.php
[php]
phpinfo();
>
phpinfo();
>
4)、开发板上启动lighttpd
5)、在PC上输入http://192.168.*.*/test.php，则在浏览器上显示php的信息
公安备案：皖公网安备34019102000119号 
